Card type or independent structure, which is applied to centralized management 2U/4U framework
8-bit digital code and non-compression type video transmission
Support any high-resolution video signal
5Hz-10MHz video channel
Automatic compatible PAL, NTSC and SECAM video system
With APC circuit, constant input optical power, and large dynamic range
Kilomega optical fiber transmission, large capacity, and easy to upgrade
Power supply and other parameter state indication, which can monitor the operation condition of system
Support no-damage regenerative trunk of video
Advanced self-adapting technology, and it is unnecessary to implement the adjustment of spot electrics or optics when using
Industry-grade design and modularization design make the equipment reliable and flexible
Can automatically restore the fuse of power supply
Full built-in power supply and the appearance design of shell are unique.

Technical Specification

Fiber Features:( the fiber optic connectors usually is FC, can order ST)

Optics:

Wavelength	WDM:1310nm/1550nm
Output Power	-8~3dBm
Optic fiber	50/125u multimode,62.5/125u multimode,9/125u single mode
Rx sensitivity	-26dBm
Optical connector	FC,ST,SC (optional)
Distance	0~550M (MM) / 0~80KM (SM) (Default distance is 20Km)

Video:

Number of Channels	2
Input/output impedance	75 Ohm (unbalance)
Standard video input/output voltage	1.0Vp-p
Video Bandwidth	50MHz
Sampling Bandwidth	8bit
Sampling Frequency	108MHz
Signal to noise ratio	>67dB
Rise and Fall time	<0.8ns
Optical Signal Intrinsic Jitter	<0.2 UI
Differential Gain	< ±1.5%
Differential Phase	< ±1°
Connector	BNC
Supporting video pixel	1280(H)x720(V)@30Hz/1MPX 1280(H)x720(V)@50Hz/1MPX 1280(H)x960(V)@30Hz/1.3MPX 1920(H)x1080(V)@30Hz/2MPX

Data:

Protocol	Default :RS485 (RS232/RS422 Optional)
Number of channels	2
Connector	9 pins Terminal Blocks
Data Rate	0-200Kbps
Directions	Default :Simplex from Rx to Tx (BIDI duplex optional)

Mechanical Structure & Environment

Application

Ordering information

Model Number	Product Configuration	Fiber Interface	Fiber Mode	Wavelengths	Maximum Transmission Distance
HD-M2V-T/RF	2 Ch Video	FC/SC/ST	Multi-mode	1310/1550 nm	2Km
HD-S2V-T/RF	2 Ch Video	FC/SC/ST	Single-mode	1310/1550 nm	20Km
HD-M2V↑1D↓3-T/RF	2 Ch Video 1 Ch Data	FC/SC/ST	Multi-mode	1310/1550 nm	2Km
HD-S2V↑1D↓3-T/RF	2 Ch Video 1 Ch Data	FC/SC/ST	Single-mode	1310/1550 nm	20Km

Company profile

2009 HANDAR OPTICS Established in Nov 2009 , with professional R&D and sales team who had been working in fiber optical telecommunication field since 2004 .
2010 HANDAR OPTICS started to produce full range of multi-functional video/audio/data/Ethernet/Telephone/Alarm to fiber converters and became to one of the leading manufacturers in this field
2011 HANDAP OTPCIS founded our engineers team to develop the SFP transceivers , and start to produce 155M and 1.25G SFP transceivers at Aug 2011
2012 HANDAR OPTICS started the project for 10G SFP+
2013 HANDAR OPTICS founded our engineers team to develop the Industrial level Ethernet Switch and POE switch . and stated to produce at the end of 2013 .
2014 HANDAR OPTICS started the project for 40G QSFP/CFP/CFP2
2015 HANDAR OPTICS improved our products for analog video/audio/data multiplexer to High-Definition series , include Analog high-definition TVI/CVI/AHD and Digital high-definition SDI/HDMI . We became to the leading manufacturer of such products in Shenzhen China .
2016 HANDAR OPTICS moved to new office with better workshop which allow us to offer better products and services to our partners .
2017 HANDAR OPTICS will keep focusing on fiber optical telecommunications field and offer to all our partners higher quality and better services .

2 Channels AHD video to fiber converter with RS485 Reverse Data BNC connector

2 Channels 8bit BNC AHD Fiber Converter High-Resolution With 0~95% Humidity

Fiber Ethernet Media Converter