Shenzhen Handar Optical Technology Co.,Ltd
Shenzhen Handar Optical Technology Co.,Ltd Details determine success or failure, choose the future of success
Add to Cart
Mini gigabit ethernet switch Fiber Ethernet Switch 8 port flow control 12v
Product Description
This series access layer Gigabit Ethernet switch with 8*10/100/1000M auto-sensing ports can be the same network of 10Mbps, 100Mbps or 1000Mbps network devices seamlessly integrated together. Can automatically adapt to full or half duplex mode, which enables bidirectional transmission rates up to 2000Mbps per port.
MAC address self-learning function, to ensure error-free data transmission. Store and forward switching mode, prevents damaged packets flooded in the network. Flow control function, can prevent instantaneous large amounts of data on the network impact, support Auto-MDI / MDIX auto-flip function. Large capacity, high bandwidth, non-blocking full wire speed on all ports work, support long frame transmission; the use of intelligent and secure network of Internet cafes, hotels, Intelligent Community, SMEs, high-definition network video surveillance to provide a low-cost, high reliable solution.
There have LED indicators on the front panel , it can dynamically display device connection and running, providing a simple fault detection method, easy maintenance and management.
Specifications:
| Product Model | HD-2228-SFP |
| Supported protocols | IEEE802.3,IEEE802.3u,IEEE802.3ab,IEEE802.3x |
| Ports | 8 Gigabit RJ45 port |
| 1000Base-LX: using long wavelength laser (1310nm) over the multi-mode and single- mode fiber, multimode fiber the maximum distance is 550m, single mode 10-24km. | |
| 1000Base-LX: using long wavelength laser (1310nm) over the multi-mode and single- mode fiber, multimode fiber the maximum distance is 550m, single mode 10-24km. | |
| 1000Base-SX: 62.5um maximum transmission distance of multimode fiber 275m, using 50μm multimode fiber the maximum transmission distance of 550 meters. | |
| Network Media | 1000Base-SX: 62.5um maximum transmission distance of multimode fiber 275m, using 50μm multimode fiber the maximum transmission distance of 550 meters. |
| 10Base-T: Cat.3 or above Category 3 UTP; (supports a maximum transmission distance of 200m) | |
| 100Base-TX:Cat.5 UTP;(Support max distance 100m) | |
| 1000Base-T:CAT-5E UTP or Cat.6 UTP(Support max 100m) | |
| MAC Address Table | 8K |
| Caching | 1Mbits |
| Backplane bandwidth | 16Gbit |
| 10Mbps:14880pps | |
| Filtering and forwarding rate | 100Mbps:148800pps |
| 1000Mbps:1488000pps | |
| Dimensions | 170x73x26mm |
| Environments | Storage temperature:-40℃~75℃;Storage humidity: 5% to 90% non-condensing |
| Operating temperature: -20℃~55℃;Operating humidity: 10% to 90% non-condensing | |
| Power | Input:90-264VAC,50-60HZ;Output:12V0.5A |
| Power Consumption | Consumption: Max 5W |
Feature:
◆Switch Ethernet signals among 10/100/1000M UTP ports (T) and 1000M Optical Fiber Interfaces (X)
◆ Auto negotiation function, supports UTP ports 10/100/1000M and Full Duplex/Half Duplex auto-negotiation
◆SFP slot supports 1000M and Full Duplex mode.
◆Supports flow control and broadcast storm protection.
◆Supports VLAN and QoS.
◆Supports max 10K bytes frame.
◆low power consume (4W), low heat, and good reliability
Competitive Advantage: